Norgren Syringe V6 User Manual

Syringe v6 (6cm) product line, Physical, Environmental

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

10/13

PDS-0010 REV. 5

Syringe V6 (6cm) Product Line

Physical

Length (Dispensed)
4.37"; (Aspirated):6.73"

Thread Type
¼-28 UNF-2A

Test Pressure
80 psi

Environmental

Operating Temperature
50°F to 104°F (10°C to 40°C)

Storage Temperature
13°F to 185°F (-25° to 85°C)

Relative Humidity
Up to 100%

Mechanical

Chemical

Standard Syringe Seal
PTFE

Wetted Materials
Borosilicate Glass, PCTFE, PTFE
(or UHMW) (smaller sizes ZDV
tips are PTFE coated 316L)

Syringe Tips
Lubricated with laboratory-
grade Silicone

The V6 syringe line is designed to couple to a
Syringe V6 Pump and standard valve assembly.
These syringes are typically used in various
types of instruments and analyzers serving
clinical, medical, and analytical instrumentation
applications. An array of syringe volumes are
available that can be dispensed and/or aspirated
over a full 6cm stroke.

*Add 1 pound drag force to non-lubricated plunger tip requests.

Syringe Sizes

10ul

25ul

50ul

100ul

250ul 500ul 1.0ml

1.25ml

2.5ml 5.0ml

10ml

25ml

50ml

Orifice Diameter (in)

.016

.024

.032

.039

.076

Syringe (End Cap) Diameter (in)

0.4

0.5

0.6

.75

1.12

1.5

*Max Drag Force (lbs)

3.0

6.0

8.0

7.0

10.0

15.0

PTFE

UHMW

Standard Syringe Assembly (individually boxed):

Size

Orifice

Standard Syringe

ZDV

Port Thread

25ul

0.027

17591

—

¼-28 UNF

50ul

0.024

17592

—

¼-28 UNF

100ul

0.032

17593

—

¼-28 UNF

250ul

0.039

17594

19509

¼-28 UNF

500ul

0.076

17595

19537

¼-28 UNF

1.0ml

0.076

17596

25429

¼-28 UNF

1.25ml

0.076

17597

25431

¼-28 UNF

2.5ml

0.076

17598

19539

¼-28 UNF

5.0ml

0.076

17599

18463

¼-28 UNF

10.0ml

0.076

17600

18469

¼-28 UNF

25.0ml

0.076

17601

23734

¼-28 UNF

50.0ml

0.076

17602

—

¼-28 UNF

Syringe construction:
Syringes have Borosilicate glass. The 25ul, 50ul, and 100ul syringes use a standard plunger tip,
while the 250ul through 50ml incorporate a canted spring design.