Norgren 223 Series - Manual

Performance
Function The Pressure Protection Valve assembly is intended to isolate a portion of a vehicle air system if a leak
occurs, so that the integrity of the remaining system is retained. This valve to mount on an air tank.
Limitations The Pressure Protection Valve assembly is designed for use on vehicle air systems with a normal duty
cycle between 100 and up to 150 PSIG in a temperature range of –40°F to +200°F. The valve, as mounted
on the vehicle, is unprotected from the environment and is subjected to vibration conditions similar to
the vehicle.
Part Number 223-XXX
Opening and Closing Performance Refer to Pressure Protection Valve Cross Reference document.
Air Line Connection Threaded 3/8" NPT and 1/2" NPT inlet fittings and 1/4" NPT and 3/8" NPT female outlet.
Mounting Air tank
Material Zamak 3
Features
Norgren GT Development 223 Series Pressure
Protection Valves are designed for convenient,
in-tank mounting, with either 3/8" or 1/2" NPT
threads. Configuration includes dual outlets, with
a variety of closing pressures to best match the
customer’s application.
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren GT Development Corporaton, 2014
Pressure Protection Valves
223–Series
REV: 8/14 01