Norgren 5200-75 Series - Manual (Page 2)

0.31
REF
SPRAY CAP
2.38 REF
12° REF
DOWN
SUPPLY PORT
DELIVERY PORT
DATE CODE/PART ID
0.47
REF
SUPPLY PORT
0.15 REF
DELIVERY PORT
0.99 REF 0.61 REF
Part Number 223-XXX Cap Color Open (PSIG) Close (PSIG) Outlets (Female) Inlet (Male) 2 Close 4 Open 4
355, 355V Black 55 ± 10 45 ± 10
3/8 - 18 NPT
3/8 - 18 NPT 0.62 2.48 ± .05 2.68 MAX
365 Black 65 ± 10 55 ± 5
375 Black 75 ± 10 60 ± 5
385, 385V Red 85 ± 10 67 ± 5
455, 455V Black 55 ± 10 45 ± 10
1/2 - 14 PTF SAE SHORT
0.69 2.56 ± .05 2.76 MAX
465, 465V Black 65 ± 10 55 ± 5
475 Black 75 ± 10 60 ± 5
485 Red 85 ± 10 67 ± 5
485V, 485V2 Red 85 ± 10 67 ± 5
565, 565-1 Black 65 ± 10 55 ± 5
1/4 - 18 NPT 565-2 Black 65 ± 10 55 ± 5
585-V Red 85 ± 10 67 ± 5
585 1 Red ≤ 100 ≥ 70
1/4 - 18 NPT
585-1 1 Red
≤ 100 ≥ 70
585-2 3 Red 1/4 - 18 NPT
585-2B, 285-2BV 5 Black 85 ± 10 67 ± 5
1/4 - 18 NPT 585N, 585NP 1 6 Red 85 ± 10 67 ± 5
1/4 - 18 NPT
585T 5 Red 85 ± 10 67 ± 5
685V Red 85 ± 10 67 ± 5 1/4 - 18 NPT 3/8 - 18 NPT 0.62 2.48 ± .05 2.68 MAX
785 Red ≤ 100 ≥ 70 3/8-1/8 NPT 1/2-14 PTF SAE SHORT 0.69 2.56 ± .05 2.76 MAX
1 One of the outlet ports to be plugged (223-585, 585-1, and 585NP only) pipe sealant PST 567 applied to male thread plug
2 Thread height
3 No plug for 223-585-2
4 Open and closed piston travel height
5 Vibra-Seal applied to male threads for 223-585N, 585NP, and 585-2BV
6 Internal 1/4-18 NPT thread only, no nipple
Warning
Improper selection, misuse, age or malfunction of components used in
commercial vehicle systems can cause failure in various modes. The system
designer is warned to consider the failure modes of all component parts
used in commercial vehicle systems and to provide adequate safeguards to
prevent personal injury or damage to equipment or property in the event of
such failure modes. System designers and end users are cautioned to consult
instruction sheets and specifications available from the factory. The system
designer/end user is responsible for verifying that all requirements for the
application are met.
Warranty
The products described herein are warranted subject to seller’s Standard
Terms and Condition of Sale, available at seller’s website.
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren GT Development Corporaton, 2014
REV: 8/14
Inline Pressure Protection Valve 5200-75
02
Dimensions (Inches)
Pressure Protection Valve Cross Reference