Norgren R06 Series - Manual (Page 2)

ALE-5-3
All Dimensions in Inches (mm)
Littleton, CO USA Phone 303-794-2611 www.norgren.com
R06 Special Purpose Regulators
Technical Data
Fluid: Water and compressed air
Maximum pressure: 400 psig (27 bar)
Operating temperature
Water service: 35° to 150°F (2° to 65°C)†
Air service: -30° to 150°F (-34° to 65°C) *†
* Air supply must be dry enough to avoid ice formation at temperatures
below 35°F (2°C).
Typical flow for water service at 100 psig (7 bar) inlet pressure, 60 psig (4 bar) set
pressure and a droop of 15 psig (1 bar) from set: 1.3 gpm (4.9 lpm)
Typical flow for compressed air service at 100 psig (7 bar) inlet pressure, 90 psig
(6.3 bar) set pressure and a droop of 15 psig (1 bar) from set: 12 scfm (5.7
dm
3 /s)
Gauge ports: 1/8" PTF
Materials
Body: Brass
Bonnet
Standard: Acetal resin
Optional: Brass
Valve: Brass/nitrile
Valve seat: Acetal resin
Elastomers: Nitrile
PORT SIZE 1/8 "
SPRING RANGE: 5 to 100 psig (0.3 to 7 bar)
INLET PRESSURE: 100 psig (7 bar)
WATER FLOW CHARACTERISTICS
0 2 4 6 8 10 litres/min
WATER FLOW
0 0.5 1.0 1.5 2.0 2.5 US gal./min
OUTLET PRESSURE
8
6
4
2
0
bar
100
80
60
40
20
0
psig
PORT SIZE: 1/8"
SPRING RANGE: 5 to 100 psig (0.3 to 7 bar)
INLET PRESSURE: 100 psig (7 bar)
AIR FLOW CHARACTERISTICS
0 2 4 6 8 10 dm 3 /s
AIR FLOW
0 4 8 12 16 20 scfm
OUTLET PRESSURE
8
6
4
2
0
bar
100
80
60
40
20
0
psig
Typical Performance Characteristics
0.91 (23)
2.46 (63) 2.86 (73)
1.1 (28)
1.03 (26)
3.01 (77) 3.41 (87)
Models with Plastic Bonnet Models with Brass Bonnet
1.50 (38)
1.50 (38)
1.50 (38)
1.50 (38)
2.13 (54)
1.57 (40)
2.13 (54)
1.57 (40)
Panel mounting hole diameter:
Models with plastic bonnet: 1.19" (30 mm)
Models with brass bonnet: 0.81" (21mm)
Maximum panel thickness: 0.25" (6 mm)
Service Kits
Item Type Part number
Service kit
Relieving 3407-18
Non relieving 3407-17
Service kit includes slip ring, diaphragm, standard valve
seat with o-ring, valve, valve spring.
† Brass bonnet & body combination max temperature 200°F