Norgren SNS06 User Manual

Toughened nut sensor sns06, Features, M6 nut detector system

.18 (4.5)

2.70 (68.6)

2.15 (54.6)

.16 (4.1)

.20 (5.1)

NOTE 5

2X .04 (1)

1.85 (47)

.35 (8.9)

NOTE 1

NOTE 2

NOTE 3

NOTE 4

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

001 25962 13230SP 12/4/12

Toughened Nut Sensor

SNS06

Features

For Heavy Duty Applications with
sensor tip radial loads up to 50 lbs.
For use in weld applications.
Immune to weld fields.
Resistant to weld fields.
Resistant to weld slag.
Can be used to detect thread presence.
Can be used as a locating pin.
Minimum nut thickness is 5.0mm (.20")
for M6 nut
Maximum blank thickness is 1.6mm
(.06")

Note 1

2X M8X 1.0

Note 2

2X M8 JAM NUTS

Note 3

SOLD SEPERATELY

Note 4

SOLD SEPERATELY

Note 5

SENSING AREA

Sensor

Monitor

Cable

Weight

SNS06

SMH36006 (NPN)

SCE13000 2m (6ft)

.037 lbs / 17 gm

SMH37006 (PNP)

SCE13001 2m (6ft) (Angled)

M6 Nut Detector System

Sensor connector:
3-pin (male) 8mm (pico) connector

Operating temperature range:
32°F to 212°F (0°C to 100°C)

Target material:
Ferrous/Non-Ferrous

Technical Data

SEE ENGINEERING ADVANTAGE

Scan with a QR code reader – www.norgren.com/automationsolutions

Tel: 734-429-4989

Dimensions in. (mm)

See also other documents in the category Norgren Hardware: