MyWeigh Flipscale F2 - Manual (Page 5)

Stable Reading Indication: This is a very precise scale - the display may seem to wander or jump when
weighing. This is due to air currents or vibrations. Stable weighing is achieved when the display remains
fixed for 3 seconds.
* Overload: When an applied load exceeds the capacity. “HHHH” will appear on the display. Remove
excessive load immediately. The unit may return to normal operation. !Remember: You can
permanently damage the scale and void your warranty by overloading it!
* Negative Value: Any tared value will be displayed as a negative number once all weight is removed,
press Z/T or cycle the power to re-zero the scale.
* Auto off: An auto shut off feature is provided to conserve battery power. The unit will automatically
turn off after approximately 2 minutes of inactivity.
*Stable Indicator: There is a “o” stable indicator that appears on the left side of the LCD whenever the
scale is stable and at Zero
* Flip Cover: Please keep the protective cover closed when the scale is not in use (it will help protect the
scale from possible damage)
KEY PAD FUNCTIONS
* UNIT
Unit selection: Press the key once to change weight unit.
G=Grams, OZ= Ounces, DWT= Pennyweight, OZT=Troy ounces
Flipscale F2-400 Accuracy: +/- 0.1g, 0.005oz, 0.1dwt, 0.005ozt
Flipscale F2-125 Accuracy: +/- 0.05g, 0.002oz, 0.05dwt, 0.002ozt
* ON/OFF
Press this key to turn unit on. Once the unit is on, press and hold the same