MyWeigh Flipscale F2 - Manual (Page 3)

* Handle with care. Gently apply all items to be weighed onto tray top. Although this scale is designed to
be quite durable, avoid rough treatment as this may permanently damage the internal sensor and void
your warranty.
* Avoid lengthy exposure to extreme heat or cold, your scale works best when operated and stored at
normal room temperature. Allow the unit to acclimate to any major temperature change for at least one
hour before use.
*Place the item to be weighed on the platform, after the stable weight is displayed remove the item
immediately. This will prolong the longevity and accuracy of this weighing instrument..
.** Do not operate near an in-use cell phone, cordless phone, radio, computer or other electronic
device. These devices emit RF and can cause unstable scale readings. If your scale ever performs poorly,
try moving the scale to a different room or location. This is a very precise scale - the display may seem to
wander or jump when weighing. This is due to air currents or vibrations. Stable weighing is achieved
when the display remains fixed for 3 seconds.
OPERATION_____________________________________________
If your scale ever performs slowly, inaccurately, or shows the battery icon please replace the batteries.
Battery Operation:
1) Two “CR2032" button style batteries are required.
2) To install batteries:
a) Release the battery cover by sliding out-wards.
b) Place batteries into battery compartment aligned correctly.
c) Re-instal the battery cover.
DO NOT USE EXCESSIVE FORCE AND DO NOT PRESS ON THE TRAY
3) The scale is now ready for battery operation.
CALIBRATION__________________________________________