MyWeigh Flipscale F2 - Manual (Page 2)

5) If the display appears “fuzzy” or unclear, try viewing the display from a different angle. We set the
LCD display for maximum viewability, but from odd angles it may appear a bit unclear due to the
positioning angle.
Although the Flipscale is designed to be extremely durable, It’s important that you never overload or
drop/shock the scale. Scales are delicate instruments and unlike Cellular phones, scales have delicate
sensors that determine how much an item weighs. If you drop or shock your scale, these sensors "feel"
the shock and are sometimes destroyed. This happens with all digital scales. We design our scales to be
as resistant to shock or drops as possible, however there is no way for us to protect 100% against load
cell or sensor damage. A well-treated scale will provide years of reliable and accurate weighing.
However an abused scale will only work until it’s sensors are damaged.
FLIPSCALE F2
MANUAL & OPERATION GUIDE
PLEASE READ COMPLETE INSTRUCTIONS BEFORE USE
Thank you for purchasing the Flipscale F2. With normal care and proper treatment it will provide years
of reliable service. Please read all operating instructions carefully.
.KEEP THE FOLLOWING POINTS IN MIND:
* If the display becomes locked on Out2 please recalibrate the scale.
* Do not Overload (exceed the capacity) of the scale including the weight of any trays or bowls
combined with objects you may be weighing. Overload or Dropping/shocking the scale will damage the
sensor and void your warranty.
* Allow sufficient warm up time. Turn the scale On and wait several seconds to give the internal
components a chance to stabilize before weighing.
* The cleaner the environment the better. Dust, dirt, moisture, vibration, air currents and proximity to
other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.