MyWeigh Pointscale 5.0 - Manual (Page 6)

excessive load immediately. The unit should return to normal operation. Remember: You can
permanently damage the scale by overloading it!
NEGATIVE VALUE
Any tared value or a value left in memory will be displayed as a negative number once all weight is
removed from the unit. Depress tare to return the unit to zero.
MEMORY
The memory function is designed to allow the user to store values and to then progressively add these
values into a sample or procedure. Unlike the tare feature, the unit returns to zero and a memory
indication appears at the upper left of the display. After a subsequent weight is added, press memory
again. The original value is added to the current value giving the total gross weight of the current
sample. Different samples are needed and a total gross weight of all samples is required. This process is
further outlined on the previous page.
AUTO OFF
An auto shut off feature is provided to conserve battery power. The unit will automatically turn off after
approximately 2 minutes of inactivity.