MyWeigh Pointscale 5.0 - Manual (Page 3)

ON/MEMORY
Press this key to turn unit on. Once the unit is on the same key operates the additive memory feature.
The following steps outline the procedure for cumulative weighing of samples:
1. Place container on tray top, wait for stable reading, then depress "TARE" to return scale to zero
and permanently remove the empty containers weight from the additive procedure.
2. Add first sample until desired weight is achieved.
3. Press ON key to reset unit to zero. The memory symbol "m" appears in the upper left corner
indicating the previous weight value has been stored.
4. Add second sample until desired weight is achieved.
5. Press key again. The "m" symbol will disappear and the display will show the combined weight
of the first and second samples. Repeat steps 2 through 4 for additional items.
Note: When the entire load is removed from the scale the display will flash a negative value equal to the
tared value of the container. To reset the scale to zero press the tare key.
TARE
Press tare to reset the scale to zero. Tare can be used for eliminating the weight value of a container.
Turn the scale on, Place an empty container on the scale and press TARE. The scale will reset to 0.0, then
place the items to be weighed in the container and the correct weight of the items will appear on the
display.
Note: When al weight are removed from the weighing tray, the tared value of a container will be
displayed as a negative number. Depress tare again to return the display to 0.0.
* Special Tray/Cover (PT 5.0 only)
The protective cover of the Pointscale is designed to also be used as a platform expansion tray. The
cover can only be removed when the scale is fully open. Simply open the scale to unlock the cover and
slide the cover towards the back of the scale. As pictured on the box, the cover can be used as a tray.
Place it on the scale’s weighing platform and turn the scale ON. The scale will automatically TARE (zero)
itself with the tray on the scale. (if this does not work properly, you can turn the scale ON, then place
the upside down cover on the tray and press the TARE key) This is perfect for weighing loose objects,
gunpowder, gems, Chinese herbs and more.
Please keep the protective cover installed when the scale is not in use (it will help protect the scale from
possible damage)
OFF
Press and hold to turn off the scale
POINTSCALE 5.0 CALIBRATION
This is ONLY for the Pointscale 5.0. The Pointscale 5.0 says "Pointscale 5.0" on the front of the scale.