MSI MS-96D2 - Manual (Page 19)

Hardware Setup
▍
MS-96D2
2-5
Hardware Setup
▍
MS-96D2
Visually inspect if the CPU is seated
well into the socket. If not, take out
the CPU with pure vertical motion
and reinstall.
5. Engage the load lever while pressing
down lightly onto the load plate.
6.
Secure the lever near the hook end
under the retention tab.
7. Make sure the four hooks are in
porper position before you install the
cooler.
8.
Important
Confirm if your CPU cooler is firmly installed before turning on your system.
Do not touch the CPU socket pins to avoid damaging. •
•
Algnment Key