KMW Communications AMS Lite - Manual (Page 11)

Sheet 11 of 30 Sheet 11 of 30 8/17/2008
©
CONFIDENTIAL
Unknown Procedure Received procedure code is not defined
TMA Minor Fault A fault in the TMA subunit is detected which reduces the gain
performance but maintains its function.
[SU 1]: SubUnit1 (Main Path) [YRMIN]
[SU 2]: SubUnit2 (Diversity Path)
TMA Major Fault LNA alarm, TDD S/W alarm
[SU 1]: SubUnit1 (Main Path)
[SU 2]: SubUnit2 (Diversity Path)
Unsupported Value The requested value is not supported.
Read Only Invalid device data parameter usage
Unknown Parameter Specified parameter is not supported for the used procedure
Bypass Mode The TMA subunit is in bypass mode and cannot report a correct
gain value.
[SU 1]: SubUnit1 (Main Path)
[SU 2]: SubUnit2 (Diversity Path)
Working S/W Missing The unit is in Download Mode state. Returned upon unsupported
procedure when in Download Mode state
Invalid File Content The data being downloaded is detected to be of wrong format or
size
Format Error Procedure message is inconsistent or if an addressed field or
antenna is invalid or the data parameter field length is
inconsistent with the corresponding field length parameter
Unsupported
Procedure
The procedure is optional and not supported or the procedure
does not apply to this device type
Invalid Procedure
Sequence
Procedure sequence as described in annex C is expected but
not experienced by the secondary device
Actuator Interference An actuator movement outside the control of the RET unit has
been detected. Probable cause is manual interference
) TICU information
Displays TICU information
Table – TICU Information
ITEM Description Remark
ID TICU ID 1 ~ 65535