iRobot Looj 330 - Manual (Page 15)

www.irobot.com 15
Slide the newly selected ejector onto the auger assembly. Ensure that
you place the ejector in the correct orientation as marked on the ejectors.
Fastern the breaker back on to secure.
Use a Phillips ® screwdriver to remove the breaker. Slide the ejector out of the
auger assembly.
Changing the Auger Ejectors
Ejector Styles
The Breaker
Your Looj comes with a set of standard ejectors that
are capable of handling the most common gutter
cleaning conditions. Additional ejector styles can
be purchased separately. When you first open your
new Looj you will need to assemble the auger with
the ejectors of your choice. Follow the instructions
below for proper assembly.
Standard
Compact
Agitate
Scoop
Optional Ejectors
Included Ejectors