iRobot Scooba 390 - Manual

Instructional videos available at www.irobot.com/usetips
Slowly fill the remainder of the
Clean tank with warm or cold tap
water. Tilt the tank and ensure it is
completely filled to the top.
4
Secure the tank cap and place
the tank back in the tank
holder.
5
Before You Get Started
Grasp the handle
and pull Scooba’s
tank up.
1 2
Open Scooba’s tank.
1
Lift the tank clear of the robot
and place the tank on a flat
surface.
2
Close the tank by pressing
down on the tank. You will
hear a click when the tank
is properly installed.
6
Charge Scooba’s Battery
Fill Scooba’s Tank
3
Fill the Clean tank with water
and 7ml (1 capful or 1 packet)
of Scooba cleaning solution
natural enzyme formula or 60
ml of white vinegar.
3
Plug the Power Supply into
Scooba to charge the battery. For
best performance, iRobot recom-
mends charging Scooba's battery
overnight the first time only.
Power Button Light
Red
Green pulse
Green fast pulse
Green solid
Red blinking
Battery Status
Battery empty
Charging
16-hour refresh charge
Fully charged
Battery not installed
TIP: Scooba is designed to work with 7 ml of Scooba cleaning solution natural enzyme formula or
60 ml of white vinegar and water. You also can use Scooba with plain tap water.
Place battery in Scooba by
rotating the battery into its
slot, making sure the tabs fit
inside the guide holes.