iRobot Roomba 790 User Manual

Important, Wireless command center, Pairing the wireless command center

DAY

HOUR

MINUTE

DOCK

CLOCK

SPOT

SCHEDULE

MON

TUES

WED

THRS

FRI

SAT

SUN

AM
PM

1. Fully charge Roomba’s battery.

2. Remove Roomba from its charger or

Home Base. Ensure Roomba is OFF.

3. Install four “AA” batteries into the

Command Center. Press CLEAN on
the Command Center. The days of
the week will flash from right to left.

4. Place the Command Center on top of

the Roomba you want to pair it with.

The Roomba will turn ON. The user

panel on both the Roomba and

the Command Center will match

each other.

5. Press and hold the Command Center’s

LEFT and RIGHT drive arrow buttons
simultaneously for a few seconds until all
the lights on the Command Center flash to
indicate that the pairing is complete.

The Wireless Command Center lets you conveniently control Roomba’s functions. You can use it to
turn Roomba on and off, schedule Roomba to clean, and steer Roomba around your room. Please
refer to the Owner’s Manual on how to set the time, and to set, view, change and delete schedules.

Wireless Command Centers are set to control only one Roomba. Prior to using your Wireless
Command Center, you need to pair it with your Roomba following the instructions below.

The Wireless Command Center is an optional accessory for Roomba 700 Series models,
780 and above.

Pairing the Wireless Command Center

Roomba

Troubleshooting

Light

Roomba Battery Indicator

Capacitive

Touch Buttons

Directional

Buttons

[00414.0811.v1]

U.S. Pat. Nos. D556,961 | 6,594,844 | 6,690,134 | 6,809,490 | 6,883,201 | 6,956,348 | 7,155,308 | 7,173,391 | 7,196,487 | 7,288,912 | 7,332,890 | 7,388,343 | 7,389,156

| 7,429,843 | 7,430,455 | 7,441,298 | 7,441,298 | 7,448,113. Additional patents pending.

IMPORTANT

Wireless Command Center