iRobot Scooba 230 - Manual

iRobot Scooba 230 Quick Start Guide www.irobot.com
iRobot Scooba 230 Quick Start Guide
Scooba is designed for use on hard floor surfaces, including tile, linoleum, vinyl, marble, slate and
sealed wood. Do not use Scooba on unfinished or unsealed hard floors, stone floors, carpets, rugs or
waxed floors.
Step 1. Charge Scooba
Step 2. Prepare the room
1
1
Put in Scooba’s battery.
Sweep the floor
or run Roomba.
Plug in and charge
Scooba up to 8 hours.
(The charger flashes
twice when plugged in,
to show it has power.)
Remove clutter and area rugs in the room to be cleaned.
2
2
TIP: To extend the battery life, always store Scooba connected to a plugged-in charger.
NOTE: When Scooba is fully charged, the light on the charger is solid green.