iRobot Mint 5200 - Manual (Page 29)

PAGE 29
Trouble Shooting
Solution
Plug the included adapter into the cleaner and charge the battery until the power
button light turns solid blue while the adapter is plugged in.
If charging does not work, make sure the rechargeable battery is securely connected.
Remove the battery door cover on the bottom of the cleaner with a screwdriver.
Disconnect and re-connect the rechargeable battery pack via the small
white plug.
Replace the battery door and tighten the screw.
Press the power button.
An incompatible adapter has been connected to Mint Plus.
Remove the incompatible adapter and connect the adapter that was included
with Mint Plus.
A solid red light on Mint Plus’s power button indicates it needs to be charged.
Power Mint Plus off and plug in the included adapter.
Charge the battery until a solid blue light appears on Mint Plus’s power button.
If Mint Plus’s power button still shows a red light after charging, make sure Mint Plus
is plugged into the correct adapter.
A flashing red light on the power button indicates the battery is low, but Mint Plus still
has cleaning time left.