iRobot Scooba 200 Series - Manual (Page 16)

iRobot Scooba 200 Series Quick Start Guide www.irobot.com
iRobot Scooba 200 Series Quick Start Guide
• Before using Scooba for the first time, plug in and charge Scooba until green light on charger is
solid (up to 8 hours).
• Sweep the floor prior to using Scooba.
Floor Types
Scooba is designed for use on hard floor surfaces, including tile, linoleum, vinyl, marble, slate, stone
and sealed wood. Scooba is not recommended for use on unfinished or unsealed hard floor surfaces,
carpet, rugs or waxed floors. Scooba is not intended for use on laminate flooring, which may be
damaged by wet cleaning methods.
Cleaning Solution
Scooba is designed to work only with Scooba Hard Floor Cleaner or plain tap water.
Filling the tank
Slowly add clean water to Scooba’s fill port,
then add one full sample packet or ½ capful
of Scooba Hard Floor Cleaner.
(Do not use hot water.)
For Best Performance
• Remove clutter and lightweight rugs from area to be cleaned.
• Always empty and rinse both tanks after the cleaning cycle is complete.
(See Instructions for Use section.)
• Keep wheels, brushes and squeegee free from hair and debris by inspecting and cleaning the
wheels and bottom plate after each use.
• To protect bottom plate brushes, keep Scooba on storage mat, when not in use.
Battery Life
To extend the battery life, always store Scooba connected to a plugged-in charger.