iRobot Scooba 200 Series - Manual (Page 10)

irobot Scooba 200 Series Owner’s Manual 10
Cleaning Solution
Floor Types
Scooba is designed for use on hard floor surfaces, including tile, linoleum, vinyl, marble, slate, stone
and sealed wood. Scooba is not recommended for use on unfinished or unsealed hard floor surfaces,
carpet, rugs or waxed floors. Scooba is not intended for use on laminate flooring, which may be
damaged by wet cleaning methods.
Actual cleaning results will vary. Be sure to follow the floor manufacturer’s cleaning recommendations.
Cleaning Solution
Scooba is designed to work only with Scooba Hard Floor Cleaner or plain tap water.
Filling the tank
Slowly add clean water to Scooba’s fill port,
then add one full sample packet or ½ capful
of Scooba Hard Floor Cleaner.
(Do not use hot water.)
Slowly add clean water to Scooba’s fill port,
then add one full sample packet or ½ capful
of Scooba Hard Floor Cleaner.
CAUTION: iRobot does not assume responsibility for floor damage caused by the use of other cleaners
on hard floor surfaces.