CPI Communications TTP216 Series - Manual (Page 2)

TTP216 Specifications
Specifications: Subject to change without notice
Size: 5.5" wide
1.5" high
7.5" length
Weight: 1.6 lbs.
Connections: modular and screw terminals to phone line (remote)
modular and screw terminal to radio
modular desk microphone connection
Input voltage: +12 to +13.8 VDC @150mA (18 mA idle)
Line impendence: 600 ohms
Line output to phone line +10 dBm max. preset to 0 dBm
Line output from phone line -40 dBm to +10 dBm (function tone referenced)
RX input from radio: 70 mVrms or greater
Notch filter: 2175 down 50 dB from 1000 Hz reference
Control tones: Guard tone = 2175 Hz for 40 mS
Function tones
F1 = 1950 Hz for 40 mS
F2 = 1850 Hz for 40 mS
F3 = 1750 Hz for 40 mS
F4 = 1650 Hz for 40 mS
F5 = 1550 Hz for 40 mS
F6 = 1450 Hz for 40 mS
F7 = 1350 Hz for 40 mS
F8 = 1250 Hz for 40 mS
F9 = 1150 Hz for 40 mS
F10 = 1050 Hz for 40 mS
F11 = 950 Hz for 40 mS
F12 = 850 Hz for 40 mS
F13 = 750 Hz for 40 mS
F14 = 650 Hz for 40 mS
F15 = 550 Hz for 40 mS
F16 = 450 Hz for 40 mS
Monitor = 2050 Hz for 40 mS
Hold Tone = 2175 Hz for duration of PTT
Control function outputs: PTT and Monitor selection are
form "C" relay contacts. 1 amp @ 30 VDC
F1/F2 are form "C" relay contact or open collector
F3-F16 are open collector