Next Advance SP300 - Manual (Page 4)

NEXT>>>ADVANCE www.nextadvance.com
SP300 Programmable Syringe Pump
1 03/23/10
1. General Information and Packing List
Thank you for purchasing the Model SP300 “Just Infusion”™ Syringe Pump. With the SP300 syringe
pump you will be able digitally set an infusion rate for steady pumping.
Please familiarize yourself with the SP300’s operation by reading this user's manual. For future reference,
record the serial number, located on the rear of the pump, and the date of purchase.
Next Advance Inc. can be contacted at:
Phone USA: (800) 738-1681 International: (518) 674-3510 FAX: (518) 674-0189
Email: [email protected] www.nextadvance.com
This Operating Manual, and the SP300’s hardware, electronics and firmware are copyrighted.
Copyright 1999-2009, all rights reserved.
Packing List
Included with the SP300 Syringe Pump are the following items:
 One of the following external unregulated power supply adapters:
Input: One of: 120V AC 60 Hz, 220V AC 50 Hz, 240V AC 50 HZ
Output: 12V DC @ 800 mA (or compatible regulated power supply)
 This Operating Manual
1.1 Warnings
!
and Cautions !
!
Read the user’s manual
! No user serviceable parts are inside.
! Disconnect power from the pump when
connecting or disconnecting cables.
! Do not immerse the pump in liquid
! Install on a stable surface.
! Keep hands and loose clothing away from
the pump's moving parts.
! The pump can automatically start when the
Pumping Parameters is operating or when
attached to an external control device.
! Prevent liquids from entering openings in
the rear of the pump.
! Use only with the supplied power supply
connected to a power source as specified on
the power supply label.
! Do not push objects of any kind into the
chassis openings, except for appropriate
cables and connectors.
! If the pump becomes damaged, do not use
unless certified safe by a qualified
technician. Damage includes, but is not
excluded to, frayed cords and deterioration
in performance.
!
Discharge static from control cables before
connecting by touching the cable to ground.
!
Before touching the pump, discharge static
by touching ground.
1.2 Disclaimer and Warranty
Disclaimer
Next Advance Inc. makes no representations or warranties, expressed, statutory or implied, regarding the fitness or
merchantability of this product for any particular purpose. Further, Next Advance Inc. is not liable for any damages,
including but not limited to, lost profits, lost savings, or other incidental or consequential damages arising from
ownership or use of this product, or for any delay in the performance of its obligations under the warranty due to
causes beyond its control Next Advance Inc. also reserves the right to make any improvements or modifications to the
product described in this manual at any time, without notice of these changes.
Next Advance Inc. products are not designed, intended, or authorized for use in applications or as system components
intended to support or sustain human life, as a clinical medical device for humans, or for any application in which the
failure of the product could create a situation where personal injury or death may occur.
All brand and product names used in this manual are the trademarks of their respective owners.