WIKA Pascal 100 - Manual (Page 72)

6 Commissioning, operation
72 WIKA Operating Instruction, Pascal 100 and Pascal 100/IS
GB
6.6.6 Offset On – Offset Off
OFFSET ON
– OFFSET OFF is used to restar the measurement on a specific channel
Press OFFSET ON to restart: zero will be displayed and OFFSET OFF will appear. Press to come
back to the previous value.
OFS indicates that the OFFSET is ON.
Figure 85 – Channel with OFFSET enabled
6.6.7 Inc. Dec
– Dec. Dec
If channel is set up for pressure or temperature measurements in the CHANNEL menu the
functions INC.DEC. e DEC.DEC. are displayed. These functions allow to increment/decrement the
number of the displayed digits
6.6.8 Chg. Out
CHG.OUT allows to change a signal coming out from an Output card.
Press CHG. OUT to display a keyboard to select the value of the signals within the limits specified
during the assignment (clarly indicated under
“min” e “Max” on the left side).
Figure 86 – Generation / simulation value modifing