WIKA Pascal 100 - Manual (Page 64)

6 Commissioning, operation
64 WIKA Operating Instruction, Pascal 100 and Pascal 100/IS
GB
1) SETUP to set up the instrument configuration, as per below picture:
Figure 70 – Instrument setup screen showing
Different languages are available: 2 different ones are available on each instrument configuration.
Standard languages are English and Italian.
Serial Baud rate must be set up at 115200 to enable data transfer to the PC.
2)
LOCK SCR To lock and unlock the screen. To unlock press LAMP
(text 5 of the keyboard)
3)
STATUS to see the status of the calibrator:
Model
– Serial Number – Version – Languages – Build date – I/O Modules
installed
– Date – Time – Battery voltage
Figure 71 – Instrument status page showing