beautypg.com

For your safety – WIKA WU-26 User Manual

Page 6

background image

6

WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio, WU-2X

11553678.02 GB/D/F/E 10/2012

5. For your safety

5. For your safety

WARNING!

Select the appropriate transducer with regard to scale range, performance and specific

measurement conditions prior to installing and starting the instrument.

Consider the relevant national regulations (e.g.: EN/IEC 60079-14) and observe the applicable

standards and directives for special applications (e.g. with dangerous media such as

acetylene, flammable gases or liquids and toxic gases or liquids and with compressors).

Non-observance can result in serious injury and/or damage to equipment.

Open pressure connections only after the system is without pressure!

Please make sure that the transducer is only used within the overload threshold limit all the

time!

Observe the ambient and working conditions outlined in section 7 „Technical data”.

Ensure that the transducer is only operated in accordance with the provisions i.e. as described

in the following instructions.

Do not interfere with or change the transducer in any other way than described in these

operating instructions.

Remove the pressure transducer from service and mark it to prevent it from being used again

accidentally, if it becomes damaged or unsafe for operation

Take precautions with regard to remaining media in removed pressure transducers.

Remaining media in the pressure port may be hazardous or toxic!

Have repairs performed by the manufacturer only.

The operator is responsible for the material compatibility as well as correct handling, operation

and maintenance.

Information about material consistency against corrosion and diffusion can be found in our WIKA-Handbook,

"Pressure and Temperature Measurement".

WARNING!

For transducer with Ex-/FM-marking: Consider the relevant safety instructions as well as

the respective country specific regulations for installation and operation in hazardous areas

(e.g.: IEC 60079-14, NEC). If you do not observe these stipulations, serious injuries and/or

damage may occur.

GB

This manual is related to the following products: