WIKA AC-1 - Manual (Page 18)

18 WIKA operating instructions pressure transmitter model AC-1
14026285.01 11/2012 GB/D/F/E
GB
6. Commissioning, operation
■ Select a cable diameter that matches the cable gland of the mating connector.
Connect the pins of the mating connector in accordance with the connection diagram.
Ensure that all seals are correctly fitted and have not been damaged.
Tighten the cable gland and check that the seal is correctly seated, in order to ensure the ingress
protection.
■ For cable outlets, make sure that no moisture enters at the cable end.
Connection diagrams
Circular connector M12 x 1
2-wire 3-wire
UB 1 1
0V 3 3
S+ - 4
Metri-Pack series 150
2-wire 3-wire
UB B B
0V C A
S+ - C
Cable outlet
2-wire 3-wire
UB brown brown
0V green green
S+ - white
Wire cross-section 3 x 0.14 mm 2
Cable diameter 3.2 mm