Mode, Temperature and fan speed changes in mode – Sunlight Supply Samsung Linesets for Mini Split Systems User Manual
Page 13

ENGLISH
13
mode
For a comfortable sleep, the air conditioner will operate it Fall asleep Sound sleep Wake up from
mode.
1. Press the
button on the remote controller.
indicator appears and Off timer indicator starts blinking on the remote
controller display.
2. Press the Time Up or Time Down button to set the time.
You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from
3 hours ~ 12 hours.
Operating hour can be set from minimum 30 minutes to maximum
12 hours.
Default operation hour is set to 8 hours.
3. Press the Set button to active it on.
Off timer indicator stops blinking and reserved time will be displayed for 3 seconds.
Then the air conditioner operates in good’sleep(Cool/Heat) mode.
If you don’t press Set button within 10 seconds after pressing the
or
Time Up or Time Down button, the air conditioner will return to previous status.
• Set Off timer in
mode over 5 hours. You fell disturbed sleep if the
is set too short or long
because the default is set to 8-hour-operation.
• If the
mode is set less than 4 hours, the operation will stop at the same time.
If the
mode is set over 5 hours, it will run as Wake up stage from the last one hour before it stops.
• Recommended set temperature is between 77˚F~81˚F (25˚C~27˚C) for cooling and 70˚F~73˚F (21˚C~23˚C) for
heating.
Temperature and fan speed changes in
mode
• Fall asleep: Eases you into sleep by dropping the temperature.
• Sound sleep: Relaxes your body and raises your temperature slightly.
• Wake up from
mode: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed.
When the air conditioner is on and in cool/heat mode
You can set the desired temperature by 1˚F in the range of
61°F~86°F(16°C~30°C).
Fan speed will be adjusted automatically according to the
mode.
However, I f you select
mode while heating operation is on,
you can adjust fan speed.
Air flow direction will be adjusted automatically according to the
mode.
However, if you select
mode while heating operation is on,
you can adjust air flow direction.
Press the Cancel button once again.
Cancel
Vivaldi MAX_AQN09VFU@@ IB&IM_32163A_E.indd 13
2012-6-20 13:28:30