Figure 20 – DuraVent DuraTech 10-24 Installation User Manual

Page 16

Support so that the chimney Tee will be

centered inside the Wall Thimble (Figs 19 &

20). Important: Verify that Tee Support is level,

then secure Tee Support to outside wall using

(3) 1/4”x 2” long lag screws for the support

base, and (8) #8, 2-1/2” wood screws for the

brackets (2 screws per bracket). Be sure to

keep the Tee Support level.

5. Install Chimney Tee and Branch:

Attach the Chimney Branch to the Tee. The

Chimney Branch is 12” or 18” Chimney Section

(depending on your wall thickness) positioned

horizontally used to pass through the wall.

Important: The Chimney section used to

penetrate through the wall must extend at

least 6” into the room. Secure the Chimney

Branch to the Tee by using the (6) sheet metal

screws provided. It is very improtant that a

good connection is made between the Branch

and the Tee. (Fig 20 & 21) Install the Tee Cap

in the bottom of the Tee, on the underside of

the Tee Support Bracket. Be sure that the Tee

Cap is securely inserted into the bottom of the

chimney pipe. Secure the Tee Cap in place by

attaching the Tee Cap Retainer Bar using the

two (2) bolts included (Fig 19).

6. Install Cover Plate and Finishing Collar:

After the Chimney Branch is secured in place

(penetrating at least 6” into the room), slide

the Cover Plate over the Branch and attach

it to the framing using (4) 1-1/4” long, round

head wood screws. Be sure that the Branch

is centered in the opening of the Cover Plate.

Twist lock the Finishing Collar on to the

female end of the Chimney Branch by twisting

clockwise.

7. Complete Chimney: Attach the Chimney

Sections as in Step 8 in the Ceiling Supported

Installation section. Secure the chimney to

Figure 21

EXTENDED

ROOF SUPPORT

BRACKET

WALL STRAP

FLASHING

2 INCHES

MINIMUM

FRAMED

ENCLOSURE

ACCESS DOOR

FOR CLEANING

2 INCHES

MINIMUM

Figure 20

WALL THIMBLE

COVER PLATE

FINISHING

COLLAR

TEE

BRANCH

(MUST

EXTEND AT

LEAST 6

INCHES INTO

ROOM)

SHIELD

EXTENSION

INSIDE

OUTSIDE

CHIMNEY

TEE

BACK OF

WALL

THIMBLE

(SECURE WITH

4 NAILS OR 4

SCREWS)