Kramer Electronics RC-7B - Manual (Page 2)

Contents
i
Contents
1 Introduction 1
2 Getting Started 2
3 Overview 2
4 Your RC-7B / RC-7BE 4
4.1 Defining the RC-7B Front Panel 4
4.2 Defining the RC-7BE Front Panel 5
4.3 Defining the RC-7B / RC-7BE Side Panel 6
5 Using Your Media / Room Controller 8
5.1 Operating the RC-7B / RC-7BE 11
5.2 Using the Macro Buttons 12
5.3 An Example of Operating the RC-7B / RC-7BE 12
6 Flash Memory Upgrade 13
6.1 Downloading from the Internet 13
6.2 Connecting the PC to the RS-232 Port 13
6.3 Upgrading Firmware 13
7 Technical Specifications 14
Figures
Figure 1: RC-7B Front Panel 4
Figure 2: RC-7BE Front Panel 5
Figure 3: Side Panel of the RC-7B and RC-7BE (Enlarged View) 6
Figure 4: Side Panel of the RC-7B and RC-7BE 7
Figure 5: RC-7BE (Front Perspective) Configuration 8
Figure 6: RC-7BE (Rear Perspective) Configuration 9
Figure 7: Example of a Typical Setup in the Lecture Auditorium 10
Figure 8: RC-7B / RC-7BE Operation Example 12
Figure 9: The KFR-Programmer Window 14
Tables
Table 1: RC-7B Front Panel 4
Table 2: RC-7BE Front Panel 5
Table 3: The Commands Configuration Example 11
Table 4: Technical Specifications of the RC-7B / RC-7BE 14