3 overview, Overview – Kramer Electronics RC-52N User Manual
Page 4
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
2
3 Overview
The RC-52N is a room controller with an RS-232 port, an IR control port and
six backlit
Each button can be assigned, via the USB port
and label capable buttons. It sends an RS-232 or IR command—
with the push of a button—to a device (such as a projector, display or
switcher) via serial control protocols. The RC-52N includes a front panel
built-in IR Receiver for IR-command learning and IR repeating. The IR
commands that are learned are used for the customized control of external
sources, receiving the IR commands from different remote transmitters
without the need for an external IR remote control unit.
, with a trigger including up to
eight
The RC-52N also features:
•
Button lighting configuration
•
A front panel lock that can be unlocked by a secret code which can be set
by the configuration application
In addition, the RC-52N supports:
•
Start up, timeout, and schedule macros
•
Power supply over USB during configuration
•
IR repeating through its IR receiver
To achieve the best performance avoid interference from neighboring
electrical appliances and position your Kramer RC-52N away from moisture,
excessive sunlight and dust.
1 Three levels of lighting intensity available. Set via the K-Config application
2 Using the K-Config software (see
Section 6
3 Serial and/or IR and/or set light and/or lock and/or delay (see