Kramer Electronics VS-88HC - Manual (Page 28)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VS-88HC
24
8.5 Storing/Recalling Input/Output Configurations
You can store and recall 1 up to 16 input/output configurations using the eight
OUTPUT buttons and the eight INPUT buttons, as Figure 11 illustrates:
Figure 11: Storing and Recalling using the Input / Output Buttons
8.5.1 Storing an Input/Output Configuration
To store the current status in memory, do the following:
1. Press the STO/+ button.
The STO/+ button blinks.
2. Press one of the 16 INPUT/OUTPUT buttons. Press the blinking
TAKE button to confirm the action.
The memory stores the data at that reference.
8.5.2 Recalling an Input/Output Configuration
To recall an input/output configuration, do the following:
1. Press the RCL/- button.
The RCL/- button blinks.
2. Press the appropriate INPUT / OUTPUT button (the button #
corresponding to the setup #). That setup configuration will blink in
the Audio and Video 7-segment display and the TAKE button, and
will only be implemented after pressing the TAKE button.
The memory recalls the stored data from that reference.
Tip : If you cannot remember which of the 16 input/output-configurations is the one
that you want, set the VS-88HC to the Confirm mode and manually scan all the
input/output configurations until you locate it.
1 The 16 input/output configurations (or setups) also include the relevant audio-follow-video / breakaway option definition