Kramer Electronics VS-801USB - Manual (Page 10)

VS-801USB - Connecting the VS-801USB 7
7
Figure 2: Connecting to the VS-801USB
4.1 Connecting to the VS-801USB via RS-232
You can connect to the VS-801USB via an RS-232 connection using, for example,
a PC. Note that a null-modem adapter/connection is not required.
To connect to the VS-801USB via RS-232, connect the RS-232 9-pin D-sub front
panel port on the VS-801USB unit via a 9-wire straight cable (only pin 2 to pin 2,
pin 3 to pin 3, and pin 5 to pin 5 need to be connected) to the RS-232 9-pin D-sub
port on your PC.
4.2 Connecting to the VS-801USB via the ETHERNET
You can connect to the VS-801USB via Ethernet using either of the following
methods:
• Direct connection to the PC using a crossover cable (see Section 4.2.1 )
• Connection via a network hub, switch, or router, using a straight-through
cable (see Section 4.2.2 )