Setting the audio mode, Adding and deleting channel groups – AVerMedia Technologies 1500 MCE User Manual

Page 47

Chapter 8

FM Radio

-43-

Setting the Audio Mode

The application will automatically set each FM radio channel to Mono or Stereo based
on the audio mode of the FM radio signals received. You can change the audio mode
of a stereo FM radio signal to Mono or vice versa.

To change the audio mode:

1. Click the

Setup button , and then click the FM Radio tab.

2. Click on the channel whose audio mode you want to change.

3. Select the

Audio Mode option you want: Mono or Stereo.

If the audio quality of a FM radio channel is found unstable or a bit

poor, you can also try to switch the audio mode between Mono and
Stereo to get a better audio quality.

Adding and Deleting Channel Groups

Selecting a Channel Group allows you to switch between the channels of the selected
group only when pressing the

Channel Up/Down button. If you want to add or

delete an FM channel group, do the following:

To add a new channel group:

1. Click the

Setup button , and then click the FM Radio tab.

2. Click the

Add Button.

3. The New Group Name dialog box will appear. Type the group name you want

and then click

OK.

4. Now you can start to scan FM radio channels and manage the scanned FM data

for this new channel group. For more information, refer to How to Auto Scan
FM Radio Channels and other titles respectively.

5. To add more channel groups, repeat steps 2 to 4.

To delete a channel group:

1. Click the

Setup button , and then click the FM Radio tab.