AVerMedia Technologies 1500 MCE - Manual (Page 17)

Chapter 3
TV
-13-
!
Click the Setup button and click the Channel tab.
Under the Channel list, simply click on the desired channel.
You will need to perform fine-tuning only if the reception of the selected
channels is not clear. You can either click the
Auto Tune button or manually
adjust the Fine Tune slider to get a clear TV picture.
Specifying a Channel Name or Description
To assign a channel name or specify a description:
1. Click the Setup button and click the Channel tab.
2. Under the Name column, double-click the text box of the channel you want to
assign a name or description.
3. Type in the channel name or description, then press Enter.
Changing the TV Channel Order
You may change the sequence of TV channels in the channel list as you prefer.
1. Click the Setup button and click the Channel tab.
2. Click on the channel which you want to move upward or downward.
3. Click the UP or DOWN button at the right side until the selected channel
moves to the desired location.
4. Click OK to exit the dialog box.