Kramer Electronics VS-21H-IR - Manual (Page 8)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VS-21H-IR 2x1 HDMI Switcher
6
5 Connecting the VS-21H-IR 2x1 HDMI Switcher
To connect the VS-21H-IR, as the example in Figure 2 shows, do the
following 1
1. Connect up to two HDMI sources to the INPUT connectors, using the
Kramer HDMI cables: INPUT 1 connector to HDMI source 1 (for
example, DVD Player 1) and INPUT 2 connector to HDMI source 2
(for example, DVD Player 2).
:
2. Connect the OUTPUT connector to the HDMI acceptor (for example,
a plasma display), using the Kramer HDMI cable.
3. Connect the 12V DC power adapter to the power socket and connect
the adapter to the mains electricity.
4. Press the SELECT button 2 to choose which HDMI input to route to
the output. The SELECT button toggles between INPUT 1 and INPUT
2, lighting the IN 1 LED when INPUT 1 is selected, or the IN 2 LED
when IN 2 is selected.
Figure 2: Connecting a VS-21H-IR 2x1 HDMI Switcher
1 Switch OFF the power on each device before connecting it to your VS-21H-IR. After connecting your VS-21H-IR, switch
on its power and then switch on the power on each device
2 Or press key 1 or 2 on the remote transmitter, once setup (see
Section 5.1 )