3 vs-21h-ir factory reset procedure, 7 technical specifications, Vs-21h-ir factory reset procedure – Kramer Electronics VS-21H-IR User Manual
Page 11: Technical specifications, Table 2 includes the technical specifications, Of the vs-21h-ir

Technical Specifications
9
9
6.3 VS-21H-IR Factory Reset Procedure
To reset the VS-21H-IR to its factory default values:
1. Connect the power to the VS-21H-IR while pressing the SELECT
button.
2. Wait until LEDs IN 1 and IN 2 blink and OUT LED lights and then
release the SELECT button.
3. Disconnect the power.
4. Reconnect the power while pressing the SELECT button.
5. Wait until LEDs IN 1, IN 2 and OUT blink and then release the
SELECT button.
7 Technical Specifications
includes the technical specifications
Table 2: Technical Specifications of the VS-21H-IR 2x1 HDMI
of the VS-21H-IR:
INPUTS:
2 HDMI connectors
OUTPUT:
HDMI connector
BANDWIDTH:
Supports up to 2.25Gbps bandwidth per channel
COMPLIANCE WITH HDMI STANDARD: Supports HDMI and HDCP
CONTROLS:
Input Select button, IR remote control
INDICATOR LEDs:
IN 1, IN 2, OUT, and ON LEDs
POWER SOURCE:
12V DC, 180mA
OPERATING TEMPERATURE:
0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE:
–40° to +70°C (–40° to 158°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
12cm x 7.15cm x 2.76cm (4.7" x 2.8" x 1.08") W, D, H
WEIGHT:
0.3kg (0.67lbs) approx.
ACCESSORIES:
Power supply, bracket installation kit, IR remote control
OPTIONS:
HDMI/HDMI male-to-male cables
1 Specifications are subject to change without notice