Kramer Electronics VP-443 - Manual (Page 20)

16 VP-443 - Controlling the VP-443
6.5 Controlling via the Infrared Remote Control Transmitter
You can control the VP-443 from the infrared remote control transmitter:
Figure 4: Infrared Remote Control
Transmitter
Keys Function
SIZE Set the size of the image displayed
POWER Toggle the power save mode ON or
OFF
CV1 Select the composite video 1 input
CV2 Select the composite video 2 input
COMP1 Select the component video 1 input
COMP2 Select the component video 2 input
PC1 Select the UXGA 1 input
PC2 Select the UXGA 2 input
HDMI1 Select the HDMI 1 input
HDMI2 Select the HDMI 2 input
HDMI3 Select the HDMI 3 input
HDMI4 Select the HDMI 4 input
XGA Reset Reset the resolution to XGA
720p Reset Reset the resolution to 720p
INFO Displays the selected input, the
input and output resolutions and the
firmware versions on the OSD
NATIVE Select the output resolution via the
EDID of the connected HDMI
monitor
Four navigation keys
When not in the OSD, the left and
right arrows also control the output
volume
for embedded HDMI inputs, this does not
affect the embedded output
OK Press to accept changes
Press also to auto adjust the picture
(see
Section 6.1.1 )
MENU Enter the OSD menu
EXIT EXIT the menu
FREEZE Freeze/unfreeze the output video
image
BLANK Toggle between a blank screen and
the display
MUTE Toggle between muting (blocking
out the sound) and enabling the
audio output
SIZE POWER
CV1
COMP2
CV2
PC1
COMP1
PC2
HDMI1 HDMI2 HDMI3
HDMI4
INFO NATIVE
MENU EXIT
FREEZE BLANK MUTE
LR-30