Kramer Electronics VP-81KSi - Manual (Page 9)

Using the EDID Designer
7
3.3 Status Section
Table 3 describes the status section of the EDID Designer.
Table 3: EDID Designer Status Section
Field Description
Device Status Indicates if the connection has been detected or not found
Input EDID Source Indicates the EDID source
Input Signal Indicates if active or inactive
Selected EDID Input Port Chooses the active EDID input port
Firmware Version Indicates the version of the EDID firmware
3.4 EDID Definition Tabs and Parameters
Table 4 describes the EDID definition tabs. The EDID parameters shown
for each tab are only illustrated in Figure 7 to Figure 12 .
For full information about the EDID definitions found in the EDID
parameter sections, refer to the VESA Enhanced Extended Display
Identification Data Standard
1
.
Table 4: EDID Definition Tabs
Tab Description See
General Contains general definitions about the display and its EDID Figure 7
Display Contains detailed definitions of the video input and the image size Figure 8
Color Contains detailed definitions of color support Figure 9
Established Timing Contains detailed definitions of resolution and timing Figure 10
Standard Timing Allows the user to define 8 preset timing schemes Figure 11
Detailed Timing Allows the user to define detailed timing schemes Figure 12
1 Available from www.vesa.org