Kramer Electronics VP-81KSi - Manual (Page 7)

Using the EDID Designer
5
3.1 Menu Commands
Table 1 describes the menu items of the EDID Designer.
Table 1: EDID Designer Menu Items
Menu Item Description
File Connect Connects or disconnects the device
New EDID Creates a new EDID
Open EDID Opens an existing EDID
Save EDID Saves the current EDID
Save EDID as… Saves the current EDID with a different name or to a
new location on disk
Exit Closes the EDID Designer
Command Load EDID from port Loads the EDID from the Selected EDID Input Port
Download EDID to port Loads EDID to the Input EDID Source
View Edit EDID Select read only/modify
Byte Viewer Displays the Byte Viewer window (see Figure 5 )
Select Device Selects the Other device or VA-2H
Help About Describes the SW version of the EDID Designer
3.2 Toolbar Buttons
Table 2 describes the toolbar buttons of the EDID Designer.
Table 2: EDID Designer Toolbar Buttons
Button Description
Creates a new EDID for editing
Opens an existing EDID from the disk
Saves the current EDID to the disk
Displays the Byte Viewer window to edit the hex codes (see Figure 5)
Toggles Read-only/Modify, to disallow or allow editing of the EDID
Connects or disconnects the communication link to the computer. When connecting to a
device you are prompted for the connection parameters (see
Figure 6 )