Kramer Electronics VP-81KSi - Manual (Page 13)

Using the EDID Designer
11
3.5 CEA Extension Tabs and Parameters
Table 5 describes the CEA extension tabs. The parameters shown for each
tab are illustrated in Figure 14 to Figure 19 .
Table 5: CEA Extension Tabs
Tab Description See
Header Contains general definitions about the display and its EDID Figure 14
Video Contains detailed definitions of the resolution and aspect ratio Figure 15
Audio Contains detailed definitions of audio parameters Figure 16
Speakers Contains detailed definitions of installed speakers Figure 17
Vendor Contains vendor specific settings Figure 18
Detailed Timing Contains detailed definitions of timing, stereo display and the sync
scheme Figure 19
To view the CEA Extensions:
1. On the General tab, enter a value in the Number of Extensions field and
click Add CEA Ext:
Figure 13: EDID Designer – General Tab - Extension Block Count
2. Click the CEA Ext tab to display all the extensions and the CEA Ext
Header tab: