Kramer Electronics VP-2x2 - Manual (Page 5)

Overview
3
3 Overview
The VP-2x2 is a high performance matrix switcher for VGA/SVGA/XGA/UXGA
signals and balanced stereo audio signals. The user can simultaneously route
an input to one or both outputs 1 .
In addition, the VP-2x2 includes:
Video bandwidth that exceeds 400MHz, ensuring transparent
performance in all applications
Audio-follow-video switching and audio breakaway (when audio and
video are switched separately)
A TAKE button that allows the user to pre-select a setting and then
activate it
A LOCK button to prevent tampering via the front panel
Control via the front panel buttons, or remotely by RS-232 serial
commands transmitted by a touch screen system, PC, or other serial
controller
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer VP-2x2 in a
location free from moisture and away from excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit 2 .
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 Input 1 (or 2) to outputs 1 and 2 simultaneously, or input 1 (or 2) to output 1 and input 2 (or 1) to output 2
2 For example: model number AD2512C, part number 2535-000251