Kramer Electronics VP-2x2 - Manual (Page 11)

Operating Your XGA/Audio Matrix Switcher
9
6 Operating Your XGA/Audio Matrix Switcher
Operate your VP-2x2 via:
The front panel buttons
RS-232 serial commands transmitted by a touch screen system, PC, or
other serial controller
6.1 Choosing the Audio-Follow-Video or Breakaway Option
You can switch balanced stereo audio signals in one of two ways, either:
Audio-follow-video (AFV), in which all operations relate to both the
video and the audio channels 1 ; or
Breakaway, in which video and audio channels switch independently
6.1.1 Setting the Audio-Follow-Video Option
To set the Audio-follow-video (AFV) option press the AFV button:
If the AUDIO and VIDEO configurations are the same, then the AFV
button illuminates. The audio will follow the video
If the AUDIO differs from the VIDEO, then the AUDIO button will flash,
and require reconfiguring for AFV operation. Press the TAKE button to
confirm the modification (reconfiguring the audio according to the video)
6.1.2 Setting the Breakaway Option
To set the Breakaway option:
Press either the AUDIO (for audio control only) or the VIDEO (for video
control only) button:
If the AUDIO button illuminates, switching operations relate to audio
If the VIDEO button illuminates, switching operations relate to video
1 Audio and video connections are the same