3 overview – Kramer Electronics VP-12x8 User Manual
Page 6
Overview
3
3 Overview
The Kramer
VP-12x8 is a high performance matrix switcher for computer
graphics video signals, with resolutions ranging from VGA through UXGA
and higher on 15-pin HD connectors. The
VP-12x8 can route any or all the
inputs to any or all the outputs simultaneously.
The
VP-12x8 features:
A computer graphics video bandwidth of 380MHz that ensures
transparent performance even in the most critical applications, and is
HDTV compatible
Buttons for the storing and recalling of up to 12 preset memory locations
1
for quick access to common configurations
A Take button that allows you to place multiple switches in a queue and
then activate them simultaneously with one touch of the button
A 7-segment display
A LOCK button to prevent tampering with the front panel and a switch
for firmware upgrade.
Control the
VP-12x8 via the front panel buttons, and remotely, via:
RS-232 serial commands transmitted by a touch screen system, PC, or
other serial controller
The Kramer
RC-IR2 Infra-Red remote control transmitter
The ETHERNET
The
VP-12x8 is dependable, rugged, and fits into one vertical space (1U) of a
standard 19” professional rack
2
.
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer
VP-12x8
away from moisture, excessive sunlight and dust
1 You can store/recall eight additional configurations via RS-232
2 The RGBHV signals are connected on 15-pin HD connectors to reduce enclosure size