Kramer Electronics 6502 - Manual (Page 5)

Overview
3
3 Overview
The 6502 4x1 S/PDIF Switcher / DA is a small-sized but efficient switcher
and distributor for S/PDIF digital audio signals. The 6502:
Lets you select one of four S/PDIF digital audio signals and outputs that
signal simultaneously to two S/PDIF acceptors
Is compatible with EIAJ CP1201, IEC-60958, AES3id and S/PDIF
standards
Features a 32kHz to 192kHz sample frequency range
Includes equalizing and reclocking of incoming data for low jitter
recovery of the digital audio data stream
Is 5V DC fed and is housed in a DigiTOOLS® enclosure
Control the 6502 using the INPUT SELECTOR buttons, or remotely via:
RS-232 serial commands transmitted by a touch screen system, PC, or
other serial controller
The Kramer RC-IR2 Infrared remote control transmitter
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position
your 6502 away from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit 1 .
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 For example, part number 2535-052002