Kramer Electronics VP-32K - Manual (Page 10)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting theVP-32K 3x1 PC / Audio Switcher
8
5.2 Controlling via the REMOTE Connector
The contact closure remote control pins operate in a similar way to the input
selector buttons. Using the contact closure remote control lets you route an
input to the outputs by remote control. To do so, temporarily connect the
required input (from 1 to 3) pin on the REMOTE terminal block connector to
the G (ground) pin, as illustrated in the examples in Figure 6. The appropriate
front panel push button illuminates as the selected input routes to both
outputs.
DO NOT connect more than one PIN to the G PIN at the same time and
DO NOT interconnect PIN 1, PIN 2 or PIN 3
Figure 6: Connecting the REMOTE Connector