Kramer Electronics VM-1610 - Manual (Page 6)

HOW DO I GET STARTED?
The fastest way to get started is to take your time and do everything right the first time. Taking 15
minutes to read the manual may save you a few hours later. You don’t even have to read the whole
manual, focus on the relevant sections.
UNPACKING AND CONTENTS
The items contained in your Kramer VM amplifier package are listed below. Please save the original
box and packaging materials for possible future transportation and shipment of the amplifier.
Amplifier
AC power cable
User manual
Rubber feet
Kramer concise product catalog
4.1 Optional Accessories
The following Kramer accessories can enhance implementation of your amplifier.
Rack Adapter - Used to install smaller size machines in a standard 1U rack. One or more
machines may be installed on each adapter.
SP-4200 - (Audio ProcAmp) - can be serially connected between a VM- amplifier and the audio
source for noise reduction sound improvement. The machine provides full stereo signal processing
as follows: Noise Reduction by up to 25dB from any source without sonic artifacts, downward
audio expansion, dynamically adjusting adaptive threshold for all-level operation, effective Dolby
B (R) decoding, AGC operation and level transcoding.
FC-4208 - (Balanced/Unbalanced Audio Transcoder) can be serially connected between a VM-
amplifier and the audio source for audio conversion of different formats. The machine is a bi-
directional Transcoder between two popular audio formats. It allows gain or attenuation while
transcoding to compensate for the 14dB change between IHF audio levels and the newly adopted,
balanced DAT input levels. Very low noise and distortion components are used throughout.