Kramer Electronics VM-1610 - Manual (Page 13)

Some useful tips:
Use two mono Das as one stereo balanced DA.
Use a dual channel DA (VM-1110 for example) for maximal studio flexibility.
Do not use excessively long cables if possible, as signal quality may degrade rapidly. Use best
cables and connectors (XLRs).
You may feed a balanced DA with an unbalanced signal via a Transcoder (FC-4208 for example).
Figure 5: Audio System Setup
TAKING CARE OF YOUR AUDIO AMPLIFIER
Do not locate your amplifier in an environment where it is susceptible to dust or moisture. These may
damage the electronics, and cause erratic operation or failure. Do not locate your amplifier where
temperature and humidity may be excessive. Do not clean your amplifier with abrasives or strong
cleaners. Doing so may remove or damage the finish, or may allow moisture to build up. Take care
not to allow dust or particles to build up inside unused or open connectors.