1 using twisted pair cable, 2 about the power connect™ feature, 3 defining the vm-114h 2x input 1:4 hdmi da – Kramer Electronics VM-114H User Manual
Page 8: Using twisted pair cable, About the power, Connect™ feature, Defining the vm-114h 2x input 1:4 hdmi da
VM-114H - Overview
5
You can daisy-chain up to six devices with the maximum overall distance between
the first and last devices being cumulative and limited by the cable type used.
3.1
Using Twisted Pair Cable
Kramer engineers have developed special twisted pair cables to best match our
digital twisted pair products; the Kramer: BC-DGKat524 (CAT 5 24 AWG), the
Kramer: BC-DGKat623 (CAT 6 23 AWG cable), and the Kramer: BC-DGKat7a23
(CAT 7a 23 AWG cable). These specially built cables significantly outperform
regular CAT 5 / CAT 6 / CAT 7a cables.
3.2
About the Power
Connect™ Feature
The Power Connect™ feature here means that only one unit in a system, the
transmitter or receiver, needs to be connected to a power source when the
devices are within 60m (197ft) of each other. The Power Connect™ feature
applies as long as the cable can carry power and the distance does not exceed
60m on standard TP cable. (Heavier gauge cable may be used to extend the
Power Connect™ range).
Warning: Using an incorrectly wired TP cable will cause permanent
damage to the device!
3.3
Defining the VM-114H 2x Input 1:4 HDMI DA
This section defines the VM-114H.
!