Kramer Electronics VM-114H - Manual (Page 15)

12 VM-114H - Using the VM-114H 2x Input 1:4 HDMI DA
5.4 Wiring the Twisted Pair RJ-45 Connectors
When using STP cable, connect/solder the cable shield to the RJ-45 connector
shield. Figure 3 defines the TP pinout using a straight pin-to-pin cable with RJ-45
connectors.
Note, that the cable ground shielding must be connected/soldered to
the connector shield.
EIA /TIA 568B Figure 3: TP PINOUT
PIN Wire Color
1 Orange / White
2 Orange
3 Green / White
4 Blue
5 Blue / White
6 Green
7 Brown / White
8 Brown
i