Muxlab Multimedia 16 x 16 Matrix Switch - Manual (Page 51)

© MuxLab Inc. Multimedia 16x16 Matrix Switch Installation Guide
Page 51
Network –m
Description: Set a specific mask address (note that DHCP must be disabled to perform this action)
Arguments: : #.#.#.#
Example: Set the mask address to 255.255.255.0
Network –m 255.255.255.0
Response: IP: 192.25.80.13
MASK: 255.255.255.0
GATEWAY: 10.0.0.1
DHCP: OFF
(or an error message if the command failed)
Network –g
Description: Set a specific gateway address (note that DHCP must be disabled to perform this action)
Arguments: : #.#.#.#
Example: Set the gateway address to 10.101.1.5
Network –g 10.101.1.5
Response: IP: 192.25.80.13
MASK: 255.255.255.0
GATEWAY: 10.101.1.5
DHCP: OFF
(or an error message if the command failed)
Network –dhcp
Description: Enable/disable DHCP feature
Arguments: : on or off
Example: Enable the DHCP feature
Network –dhcp on
Response: IP: 10.0.1.101
MASK: 255.255.0.0
GATEWAY: 10.101.1.5
DHCP: ON
(or an error message if the command failed)
8. Password
password -panel
Description: Set the front panel password
Arguments: : 4 digits
Example: Set the front panel password to 1234
password -panel 1234
Response: password panel set successfully
(or an error message if the command failed)