Muxlab Multimedia 16 x 16 Matrix Switch - Manual (Page 54)

© MuxLab Inc. Multimedia 16x16 Matrix Switch Installation Guide
Page 54
serial –b -o
Description: Modify all RS-232 settings
Arguments: : 9600, 19200, 38400, 57600 or 115200
: 7 or 8
: e, o or n (i.e: even, odd, none)
: 1 or 2
Example: Set the RS-232 settings to a baud rate of 9600, 8 data bits, no parity and 1 stop bit
serial –b 9600 –o 8 n 1
Response: Baud Rate: 9600
Data bits: 8
Stop bit: 1
Parity: NONE
(or an error message if the command failed)
12. Status
status
Description: Display the unit status
Arguments:
Example: Display the unit status
status
Response: Temperature: 28 Celsius
Voltage monitors: Ok
FANs:
- Fan 1: 2600 RPM
- Fan 2: 3200 RPM
- Fan 3: 2610 RPM
- Fan 4: 3300 RPM
Power supply:
- PSU 1: ON
- PSU 2: OFF
(or an error message if the command failed)
13. Version
version
Description: Get the current firmware version
Arguments:
Example: Get current firmware version
version
Response: Master firmware version: 1.4.0
Secondary micro version: 2
(or an error message if the command failed)